EASY SEAL
Prep Wash & Thinner
EASY SEAL Prep Wash & Thinner has two main uses: it thins the EASY SEAL Concrete Stain/Sealer, and it helps refresh old sealers before applying a new coat or fixing surface issues. It can also clean brushes and equipment used with the sealer. This process can enhance the success of resealing by reactivating the old sealer and helping the new one bond better. If you need more details, you can refer to the tech data sheet about solvent washing.
-
Use to thin EASY SEAL Concrete Stain/Sealer
-
Also used as a solvent wash
-
Available in 500 ml & 4 litres
EASY SEAL Prep Wash & Thinner is to be used to thin EASY SEAL Concrete Stain/Sealer.
It is also used as a solvent wash for re-activating existing sealer prior to a maintenance coat and surface disruption, and is suitable as a cleaner for brushes and equipment after using EASY SEAL Concrete Stain Sealer.
​
Solvent Washing:
For use before applying maintenance coatings, resealing existing old sealed surfaces and surfaces which have problems with surface disruption. From our experience, in some cases sealing disruptions may be solved using a solvent wash procedure. Solvent washing can increase the success of a re-seal by reactivating the existing sealer to assist with bonding of any new sealer. Refer to detailed information in the solvent washing tech data sheet below.
Trial of small area:
​
Always perform a preliminary test patch of approximately 50 x 50 cm to an affected area to determine the effectiveness.
Some sealing disruptions may reappear again after 3 months for Clear as the affected sealer continues to cure (expelling the solvent re-introduced to it).
Technical Data
NOVEX Easy Seal Prep Wash & Thinner
Give your old concrete a new lease of life
EASY SEAL
Revitalise, recolour, and seal new and
old concrete surfaces.
-
A decorative tinted and clear stain/sealer which protects surfaces from stains
-
Suitable for driveways, paths, exposed aggregate, slate, concrete pavers and similar masonry surfaces
-
Fast drying with great UV resistance and a low sheen finish
-
Good resistance to car tyre marking and efflorescence
-
Supplied in a clear and tinted option using Tint Base and Tint Pack to produce a coloured stain
-
Use EASY SEAL Prep Wash & Thinner as a thinner when required and also to re-activate existing sealer prior to a maintenance coat
-
Available in Test Pots, 1 litres (Clear only), 5 litres & 10 litres
-
Tint Packs come in Small & Medium, EASY SEAL Prep Wash& Thinner available in 500 ml & 4 litres